Mine Flameproof Locomotive Lamp Factory | Wholesale Mine Flameproof Locomotive Lamp

The first is a multi-layer copper wire mesh shield to disperse the heat and cut the flame. The ignition point is not reached outside the grille. The space inside the grille is extremely small. When the deflagration mixture enters, the flame has a stroke. The explosion will not be transmitted to the outside.
The second point is the safety device, there is a heavy hammer mechanism to hang the wick. When the lamp falls accidentally, the heavy hammer mechanism releases the wick and retracts it to quickly extinguish the fire and prevent explosion. Unscrewing the light cover also releases the fire suppression mechanism.
The third is the fool-proof design to prevent miners from misoperation. The ignition rod is interlocked with the lampshade, and the flint ignition rod is outside. Fasten the lampshade to ignite, open the lampshade, and the flint steel wheel is stuck. To refuel, the lampshade must be disassembled, and no refueling is allowed unless the fire is extinguished.

First of all, the LED high bay light adopts imported chips, high-quality LED packaging structure, and has the characteristics of low light decay and high light efficiency. The second is that the lamps are installed in a locked position to ensure that the lamps will not be dropped or damaged due to external factors.
In addition, the lamp body is made of light alloy material, and the special sealing and surface insulation treatment ensure that the lamp will not be corroded and rusted even under harsh conditions such as humidity and low temperature. The safety of the lamps is guaranteed, and there will be no safety problems due to the destruction of the lamps.
The last is that the LED high bay light adopts many installation forms such as seat type and boom type, which can be well adapted to different working environments.

When installing the lighting signal lights for mining explosion-proof locomotives, it is very important to pay attention to a sufficient understanding of the product, because at present, each brand has its own design, and various signal light products on the market The installation design is not universal, so you must pay attention to the structure of the signal lights you use to be able to install them better. When installing, the first thing you need to pay attention to is to determine the direction.